OEM Mini Blade Fuse for VIN/Testing stepper driver
-
Just curious what the original mini blade fuses are on the 6hc mainboard. Mine fried during a printjob after popping up the error of "Motor Phase A disconnected on driver 5" (as well as Phase B). I'd prefer not to cheap out on fuses (low QA fuses from amazon or alibaba) considering I'm using 24V power. Or if anyone has replacement fuses that have worked well for them.
I also am concerned I may have blown the stepper driver but am unsure of how to test that without a new fuse in hand. Nothing visually is off about the stepper driver but doesn't hurt to be certain. -
