M150 X too Low 3.3b2 + SBC
jay_s_uk last edited by
Running 3.3b2 on a mini5+ in SBC mode.
I have a fysetc mini 12864 display attached.
This line used to work (it sets the colour on the neopixels on the display)
M150 X1 R255 U255 B255 S3 ; set all 3 LEDs to white
Now I get the error
Error: in file macro line 66: M150: parameter 'X' too low
This was working fine on 3.3b1
Thanks, I confirm that you've found the first new bug in 3.3beta2. Try sending the command without the X parameter.
pkos last edited by
Actually, this was already there in 3.3b1
Running it without the X goes through, but there's no backlight.