cannot access dwc randomly
zshoe last edited by zshoe
plz help, ive been struggling with this duet board for a yr now and it just makes me so mad sometimes i dont ever want to use my printer. recently its doing this thing where it will not connect to anything when i try to access the dwc. it just tells me webpage not found. i have no idea where to go from there besides to check if my i.p has changed which it has in the past but of course YAT will not connect either no matter what i do it just keeps telling me "access to com port is denied" when it clearly exists and is working fine i see it in my device manager as a duet board. this has always been an issue but i usually just plug and unplug and try again a few times and it eventually works but tonight im about to throw my laptop because it wont work and ive been trying to print this part for days. i just want to know why in the hell this happens, because at this point i feel like this is more trouble than its worth, seems like every time i want to bootup this printer its a hassle. although it isnt every time a lot of the time it works just fine but lately its getting worse and worse. any tips on how to make this process easier?
Could be as simple as a failing SD card preventing the web page files from being read.
Could be poor wifi signal.
When you do get connected to it, send M122 and M98 P"config.g" in the console and post the results so we can get some info on the board.
Also post your config.g.