LCD screen and emergency stop button
carlos.oettel.perez last edited by
Hi there! This is Carlos Oettel, I am in my final year of the Aerospace Engineering Degree at Technical Universtiy of Madrid. As part of my end-of-degree project, I am going to build a 3D printer, for which I am choosing the Duet 3 Mainboard HC6.
So I have a couple of questions and I hope anyone can help me
First, I was wondering if it is possible to connect a LCD screen to the mainboard. I have seen the pin distribution, and I do not know if it is possible.
Second, I saw this video on YouTube, in which it is shown that yoy can connect an emergency stop button to the mainboard:
I was wondering if anyone can give me further information about how to connect it to the mainboard and where to buy one of them.
Thanks in advance.
PS: I apologize if my doubts seem dumb, I am a complete rookie in this wonderful world of electronics.
The only direct connect LCD is the PanelDue.
It's possible to use a HDMI touchscreen that is connected to a raspberry pi when running the Duet3 in SBC mode.