ST7567-based display Brightness

lodger · 30 Mar 2021, 14:04

I have been playing witha ST7567 based display on my Mini5.

I have set M918 too....

M918 P2 E4 F2000000 in my config.g.

The display is working but is very dull. How can i turn the brightness up ??

Not contrast !

Is it set by the voltage 3.3v not 5v ???

This is not a RGB display !

Thanks Paul

Forget all that... Its the back light not working......

lodger · 30 Mar 2021, 16:25

@lodger Seams i wrote this in a bit of a hurry and does not make much sences.....SORRY

Ok i have one of these :
https://wiki.fysetc.com/Generic_12864_Panel/

Its states its pin Compatable with the MINI 12864.

I can not seams to figure out how to get the backlight working.
This is not a RGB like the Mini and i have the Mini working fine so my config is correct for that.

I am only playing and its not inportant for me to get running . Just a bit of fun. Any Ideas

Paul