Duet3D Logo

    Duet3D

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    Solved Warning: Discarded std reply

    General Discussion
    2
    3
    135
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • oozeBot
      oozeBot last edited by

      I searched but didn't see this reported. Ever since we upgraded our 6HC + toolboard + RPi machines to 3.3 stable, we are receiving many warnings we never saw before such as the following:

      Warning: Discarded std reply src=20 RID=4094 exp 1314 ""
      

      Has this been already been reported? We cannot pinpoint what triggers it but it is usually after interaction with the machine through the PanelDue or Web UI. Thanks

      dc42 1 Reply Last reply Reply Quote 0
      • dc42
        dc42 administrators @oozeBot last edited by dc42

        @oozebot please use M115 B# (where # is the CAN address of the tool board) to check that the tool board is also running 3.3 stable.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        oozeBot 1 Reply Last reply Reply Quote 1
        • oozeBot
          oozeBot @dc42 last edited by oozeBot

          @dc42 Well that explains why it was only happening on a few of our machines.. their toolboards were still running 3.3rc2. Grr.. Thanks!

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA