Help straighten me out on pin naming

[resam]

@kb58 Duet3 does not have a "X_endstop" pin, see https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview#Section_Duet_3_MB6HC_pin_names for the official pin names.

If you want to create an endstop for your X-axis, then use M574 with the X1 parameter for the X-axis, and e.g., P"io0.in" to use the IO0 input pin.

[kb58]

@resam Got it, finally, and thanks, everyone.