Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Cannot Connect to Duet 3 Web Control

    Scheduled Pinned Locked Moved
    Duet Web Control
    4
    69
    3.6k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Phaedruxundefined
      Phaedrux Moderator @Frank 0
      last edited by

      @frank-0 said in Cannot Connect to Duet 3 Web Control:

      @phaedrux Does using the config tool automatically generate a www folder? I used the tool and it had me download a sys and www folder

      It will if you have checked off the include latest firmware/Duet Web Control files.

      @frank-0 said in Cannot Connect to Duet 3 Web Control:

      FIRMWARE_VERSION: 3.4.0beta1

      That's probably one step further than I would have recommended. I'd stick to the latest stable release while we're troubleshooting which is 3.3.

      https://github.com/Duet3D/RepRapFirmware/releases/tag/3.3

      Regardless, now that you have a firmware flashed and an SD card redone, are you able to get an IP address in YAT?

      Z-Bot CoreXY Build | Thingiverse Profile

      Frank 0undefined 2 Replies Last reply Reply Quote 0
      • Frank 0undefined
        Frank 0 @Phaedrux
        last edited by Frank 0

        @phaedrux Is the latest stable release not 3.3? What happens if the SD card has 3.3 and the board has 3.4?

        Phaedruxundefined 1 Reply Last reply Reply Quote 0
        • Frank 0undefined
          Frank 0 @Phaedrux
          last edited by

          @phaedrux Made a new SD card and have this on it. 6650af5e-3a6a-4fce-9761-c51ba26c943e-image.png.
          Is this all I need?

          Phaedruxundefined 1 Reply Last reply Reply Quote 0
          • Phaedruxundefined
            Phaedrux Moderator @Frank 0
            last edited by

            @frank-0 said in Cannot Connect to Duet 3 Web Control:

            @phaedrux Is the latest stable release not 3.3? What happens if the SD card has 3.3 and the board has 3.4?

            The SD card doesn't really hold firmware in any meaningful way other than it has the bin files available to be flashed to the board itself. We can go back to 3.3 once you have solid access to dwc again.

            Z-Bot CoreXY Build | Thingiverse Profile

            1 Reply Last reply Reply Quote 0
            • Phaedruxundefined
              Phaedrux Moderator @Frank 0
              last edited by Phaedrux

              @frank-0 said in Cannot Connect to Duet 3 Web Control:

              @phaedrux Made a new SD card and have this on it. 6650af5e-3a6a-4fce-9761-c51ba26c943e-image.png.
              Is this all I need?

              No I listed the needed folders above. In addition to those you'll actually need a firmware folder as well.

              Technically those are the bare minimum. But we should create the rest so it doesn't complain.

              Z-Bot CoreXY Build | Thingiverse Profile

              Frank 0undefined 1 Reply Last reply Reply Quote 0
              • Frank 0undefined
                Frank 0 @Phaedrux
                last edited by

                @phaedrux Could you point me back to where you listed the folders I need? I don't see it, I must be blind. I download the 3.3 firmware and then just put it in the www folder?

                1 Reply Last reply Reply Quote 0
                • Phaedruxundefined
                  Phaedrux Moderator @Phaedrux
                  last edited by

                  @phaedrux said in Cannot Connect to Duet 3 Web Control:

                  @frank-0 said in Cannot Connect to Duet 3 Web Control:

                  @kb58 After using Bossa to reset my firmware, I cannot find the config.g file. The sys folder changed to this

                  708e9f72-7a89-4a6d-9335-637dfe72a9c8-image.png

                  I have never seen anything like that before.

                  I suggest you get a clean new SD card, format it as FAT32, and then start fresh from there.

                  Create the following folders

                  sys
                  macros
                  www
                  gcodes
                  menu
                  filaments

                  Create a fresh config file set from here: https://configtool.reprapfirmware.org/Start

                  Fill out the info to the best of your knowledge. We just want a starting point.

                  What firmware bin file version did you use to flash with Bossa? 3.3?

                  https://github.com/Duet3D/RepRapFirmware/releases/download/3.3/DuetWebControl-SD.zip

                  Download that zip file and extract it into the /www/ folder.

                  That should get your SD card back to a working state.

                  Here it is.

                  Z-Bot CoreXY Build | Thingiverse Profile

                  Frank 0undefined 1 Reply Last reply Reply Quote 0
                  • Frank 0undefined
                    Frank 0 @Phaedrux
                    last edited by

                    @phaedrux What should be in the macros/gcodes/menu/filaments folder? I can make the folders, but Im not sure what to put in them.

                    Phaedruxundefined 1 Reply Last reply Reply Quote 0
                    • Phaedruxundefined
                      Phaedrux Moderator @Frank 0
                      last edited by Phaedrux

                      @frank-0 Nothing. They will be empty.

                      The gcodes folder is where your uploaded print files will go. menu is a folder for menu files when using a rotary encoder display. And filaments is used to store filament profiles if you set them up. They just need to exist otherwise you'll get a little warning that they are mising.

                      Oh, and the firmware folder is where firmware files will go in future

                      Z-Bot CoreXY Build | Thingiverse Profile

                      Frank 0undefined 1 Reply Last reply Reply Quote 0
                      • Frank 0undefined
                        Frank 0 @Phaedrux
                        last edited by

                        @phaedrux I got this set up and have this currently: 16bb2979-4ab8-4688-bfd0-2f83e5f37e1c-image.png

                        This is my config.g file: 4726b94c-87c1-472e-8765-bf8dc868e255-image.png

                        and I extracted 3.3 firmware into www folder. YAT still doesn't really work. M552 S1 P192.168.2.2 just responds with ok, not network running.

                        Frank 0undefined Phaedruxundefined 2 Replies Last reply Reply Quote 0
                        • Frank 0undefined
                          Frank 0 @Frank 0
                          last edited by

                          @frank-0 There is also no lights lit up at bottom of the ethernet port

                          1 Reply Last reply Reply Quote 0
                          • Phaedruxundefined
                            Phaedrux Moderator @Frank 0
                            last edited by

                            @frank-0 said in Cannot Connect to Duet 3 Web Control:

                            and I extracted 3.3 firmware into www folder.

                            Don't do that.

                            @frank-0 said in Cannot Connect to Duet 3 Web Control:

                            M552 S1 P192.168.2.2 just responds with ok,

                            If you send M552 what does it say?

                            @frank-0 said in Cannot Connect to Duet 3 Web Control:

                            I got this set up and have this currently:

                            Don't forget to add a folder called firmware.

                            Z-Bot CoreXY Build | Thingiverse Profile

                            Frank 0undefined 1 Reply Last reply Reply Quote 0
                            • Frank 0undefined
                              Frank 0 @Phaedrux
                              last edited by Frank 0

                              @phaedrux www folder :4e98ea59-2b9e-4bcb-89fe-80c4465832aa-image.png

                              YAT literally just says "ok", like in the images above from a while ago.

                              Should I just make an empty folder called "firmware"?

                              1 Reply Last reply Reply Quote 0
                              • Phaedruxundefined
                                Phaedrux Moderator
                                last edited by Phaedrux

                                Are you able to ping 192.168.2.2?

                                What IP is your computer using?

                                Have you tried a different cable?

                                Do the lights on the ethernet port light up if you connect to your router instead? even briefly?

                                Z-Bot CoreXY Build | Thingiverse Profile

                                Frank 0undefined 2 Replies Last reply Reply Quote 0
                                • Frank 0undefined
                                  Frank 0 @Phaedrux
                                  last edited by

                                  @phaedrux Timed out, is unreachable. Can't ping it

                                  1 Reply Last reply Reply Quote 0
                                  • Phaedruxundefined
                                    Phaedrux Moderator
                                    last edited by

                                    What IP is your computer using?

                                    Have you tried a different cable?

                                    Do the lights on the ethernet port light up if you connect to your router instead? even briefly?

                                    Z-Bot CoreXY Build | Thingiverse Profile

                                    1 Reply Last reply Reply Quote 0
                                    • Frank 0undefined
                                      Frank 0 @Phaedrux
                                      last edited by

                                      @phaedrux Computer is using an assigned IP address I changed in the control panel. It is 192.168.2.1. I tried different cable and no the lights don't light up at all.

                                      Phaedruxundefined 1 Reply Last reply Reply Quote 0
                                      • Phaedruxundefined
                                        Phaedrux Moderator @Frank 0
                                        last edited by

                                        @frank-0 said in Cannot Connect to Duet 3 Web Control:

                                        I tried different cable and no the lights don't light up at all.

                                        Not with the router either?

                                        Z-Bot CoreXY Build | Thingiverse Profile

                                        Frank 0undefined 1 Reply Last reply Reply Quote 0
                                        • Frank 0undefined
                                          Frank 0 @Phaedrux
                                          last edited by

                                          @phaedrux Yeah doesn't light up with either computer or router

                                          1 Reply Last reply Reply Quote 0
                                          • Phaedruxundefined
                                            Phaedrux Moderator
                                            last edited by

                                            Alright, I think we've solved the firmware problem since it's able to speak with YAT now and it is taking and executing commands.

                                            I think we have the SD card issue solved.

                                            Can you post your current config.g from the /sys/ folder please?

                                            Z-Bot CoreXY Build | Thingiverse Profile

                                            Frank 0undefined 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA