Print job has finished - Slicer estimations still counting!
-
Just finished a print and just happened to notice that the 'Slicer' field in the estimations window was still counting down, as though the job has not finished.
As you can see from the video it has!Video Below
https://www.dropbox.com/s/w35z3cx47n75hd2/20210819_100618.mp4?dl=0RRF3.3.0 + DWC3.3.0 Mini 5+ in standalone mode.
Regards,
Paul. -
@paulhew thanks for your report. I've added investigating it to the work list for RRF 3.4.
PS - I am guessing that this is because for some reason the job finished well before the slicer predicted, which is unusual.
Please share the GCode file that you were printing
Duet WiFi hardware designer and firmware engineer
Please do not ask me for Duet support via PM or email, use the forum
http://www.escher3d.com, https://miscsolutions.wordpress.com -
@dc42 As requested DC.
ABS-Wrap_Roller-c-14.6816g-1h1m.txt
Please rename to a .zip!
