Toolboard 1.1 Terminal Pitch
-
Hopefully an easy question.
What pitch is needed to put terminal Block Connectors into the V1.1 toolboard? I'm guessing 2.54mm pitch but wanted to be sure.
Thanks!
-
@nightlonk42 said in Toolboard 1.1 Terminal Pitch:
Hopefully an easy question.
What pitch is needed to put terminal Block Connectors into the V1.1 toolboard? I'm guessing 2.54mm pitch but wanted to be sure.
The small JST connectors on tool board 1.1 are 2mm pitch except for the CAN connector.
