Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Connecting Duet Wifi to slicer software

    Scheduled Pinned Locked Moved
    General Discussion
    4
    27
    4.7k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • number40fanundefined
      number40fan
      last edited by

      Could be. A sent you an email, btw.

      1 Reply Last reply Reply Quote 0
      • TimVukmanundefined
        TimVukman
        last edited by

        Ok, after your post of 20:12

        Current M92 in config.g :
        X640 Y640 Z3200 E400

        Changed to
        M92 X80 Y80 Z1600 E822

        Commented two lines that set Z probe since I don't have mine yet.
        Rmoved M92 line from script file

        Edited last line in Config.g to change tool to T0 since I only have 1 extruder.
        Moved T0 to M104 line in script file:

        Thanks
        Tim

        Script:
        M104 T0
        G28 ; home all
        G92 E0
        G1 Z0.1 F1000
        G1 X8.0 F2000
        G1 Y60.0 E4.0 F1000.0 ; prime
        G1 Y100.0 E8.5 F1000.0 ; prime
        G92 E0

        Config.g
        ; Configuration file for Duet WiFi (firmware version 1.17)
        ; executed by the firmware on start-up
        ;
        ; generated by RepRapFirmware Configuration Tool on Fri Sep 08 2017 10:03:01 GMT-0400 (Eastern Daylight Time)

        ; General preferences
        M111 S0 ; Debugging off
        G21 ; Work in millimetres
        G90 ; Send absolute coordinates…
        ;M83 ; ...but relative extruder moves
        M555 P2 ; Set firmware compatibility to look like Marlin
        M208 X0 Y0 Z0 S1 ; Set axis minima
        M208 X210 Y280 Z180 S0 ; Set axis maxima

        ; Endstops
        M574 X1 Y1 Z1 S0 ; Define active low and unused microswitches
        ;M558 P0 X0 Y0 Z0 H5 F120 T6000 ; Set Z probe type to switch, the axes for which it is used and the probe + travel speeds
        ;G31 P600 X0 Y0 Z2.5 ; Set Z probe trigger value, offset and trigger height
        M557 X25:175 Y25:175 S20 ; Define mesh grid

        ; Drives
        M569 P0 S0 ; Drive 0 goes backwards
        M569 P1 S0 ; Drive 1 goes backwards
        M569 P2 S0 ; Drive 2 goes backwards
        M569 P3 S1 ; Drive 3 goes forwards
        M350 X128 Y128 Z128 E16 I0 ; Configure microstepping without interpolation
        M92 X80 Y80 Z1600 E822 ; Set steps per mm
        M566 X900 Y900 Z12 E120 ; Set maximum instantaneous speed changes (mm/min)
        M203 X12000 Y12000 Z1200 E3000 ; Set maximum speeds (mm/min)
        M201 X1000 Y1000 Z100 E5000 ; Set accelerations (mm/s^2)
        M906 X855 Y855 Z855 E855 I30 ; Set motor currents (mA) and motor idle factor in per cent
        M84 S30 ; Set idle timeout

        ; Heaters
        M143 S260 ; Set maximum heater temperature to 260C
        M305 P0 T100000 B3988 C0 R4700 ; Set thermistor + ADC parameters for heater 0
        M305 P1 T100000 B4725 C0 R4700 ; Set thermistor + ADC parameters for heater 1

        ; Tools
        M563 P1 D0 H1 ; Define tool 1
        G10 P1 X0 Y0 Z0 ; Set tool 1 axis offsets
        G10 P1 R0 S0 ; Set initial tool 1 active and standby temperatures to 0C

        ; Network
        M550 PTevo Tarantula ; Set machine name
        M552 S1 ; Enable network
        ; Access point is configured manually via M587 by the user
        M586 P0 S1 ; Enable HTTP
        M586 P1 S0 ; Disable FTP
        M586 P2 S0 ; Disable Telnet

        ; Fans
        M106 P0 S0.3 I0 F500 H-1 ; Set fan 0 value, PWM signal inversion and frequency. Thermostatic control is turned off
        M106 P1 S1 I0 F500 H-1 ; Set fan 1 value, PWM signal inversion and frequency. Thermostatic control is turned off
        M106 P2 S1 I0 F500 H-1 ; Set fan 2 value, PWM signal inversion and frequency. Thermostatic control is turned off

        ; Custom settings are not configured

        ; Miscellaneous
        T0 ; Select first tool

        1 Reply Last reply Reply Quote 0
        • number40fanundefined
          number40fan
          last edited by

          How many amps do your motors use? Should be a sticker on them.

          1 Reply Last reply Reply Quote 0
          • TimVukmanundefined
            TimVukman
            last edited by

            Woah

            I think it might be doing something, but it is really hard to tell. It took forever to make the effort to home all and it did that very slowly and so far it has not moved off of home.

            I had forgotten the other change to M92. for the extruder settings so I have done that and reset.

            I am still getting "attempting to extrude with no tool selected" and the extruder is not feeding.

            1 Reply Last reply Reply Quote 0
            • TimVukmanundefined
              TimVukman
              last edited by

              After the last reset, the speed is ok, but still "attempting to extrude with no tool selected."

              1 Reply Last reply Reply Quote 0
              • number40fanundefined
                number40fan
                last edited by

                Under tools. M563 P0 instead of P1.

                1 Reply Last reply Reply Quote 0
                • number40fanundefined
                  number40fan
                  last edited by

                  The G10's under it, change to P0 as well.

                  1 Reply Last reply Reply Quote 0
                  • number40fanundefined
                    number40fan
                    last edited by

                    https://duet3d.com/wiki/Tuning_the_heater_temperature_control

                    Make sure you do these steps too.

                    1 Reply Last reply Reply Quote 0
                    • TimVukmanundefined
                      TimVukman
                      last edited by

                      The sticker says Tevo 17HD4401-c5.18

                      Google was no help on that number. I found a posting on their facebook owner page where someone got a spec sheet. Theirs is 1.5A, and Tevo says 1.4 to 1.7 is ok to use.

                      Tim

                      1 Reply Last reply Reply Quote 0
                      • number40fanundefined
                        number40fan
                        last edited by

                        Once you get everything squared away, you can up the numbers in M906 X855 Y855 Z855 to 1200 or so and even E up to a 1000 or so.

                        1 Reply Last reply Reply Quote 0
                        • TimVukmanundefined
                          TimVukman
                          last edited by

                          Hi number40fan

                          TeamViewer is installed. Let me know what you need and I will send it via private email to the one you sent me the email from

                          Thanks,
                          Tim

                          1 Reply Last reply Reply Quote 0
                          • number40fanundefined
                            number40fan
                            last edited by

                            Emailed you back.

                            1 Reply Last reply Reply Quote 0
                            • First post
                              Last post
                            Unless otherwise noted, all forum content is licensed under CC-BY-SA