Connecting Duet Wifi to slicer software
-
How many amps do your motors use? Should be a sticker on them.
-
Woah
I think it might be doing something, but it is really hard to tell. It took forever to make the effort to home all and it did that very slowly and so far it has not moved off of home.
I had forgotten the other change to M92. for the extruder settings so I have done that and reset.
I am still getting "attempting to extrude with no tool selected" and the extruder is not feeding.
-
After the last reset, the speed is ok, but still "attempting to extrude with no tool selected."
-
Under tools. M563 P0 instead of P1.
-
The G10's under it, change to P0 as well.
-
https://duet3d.com/wiki/Tuning_the_heater_temperature_control
Make sure you do these steps too.
-
The sticker says Tevo 17HD4401-c5.18
Google was no help on that number. I found a posting on their facebook owner page where someone got a spec sheet. Theirs is 1.5A, and Tevo says 1.4 to 1.7 is ok to use.
Tim
-
Once you get everything squared away, you can up the numbers in M906 X855 Y855 Z855 to 1200 or so and even E up to a 1000 or so.
-
Hi number40fan
TeamViewer is installed. Let me know what you need and I will send it via private email to the one you sent me the email from
Thanks,
Tim -
Emailed you back.
