3.4b6 Files sent from slicer don't start automatically
Serbitar last edited by
My usual workflow for prints is to slice them in prusa-slicer and send the job to a printer for immediate start. In 3.4b5 this was working fine, in 3.4b6 this no longer works. The job gets uploaded correctly and is listed in the jobs list but doesn't start.
I'm running a MB6HC is SBC mode.
@serbitar The reason is that PrusaSlicer doesn't send the G-code request to start the print in the correct format. I've already prepared a work-around for the next DSF version.