Goofed up my duetwifi
-
I goof up my duetwifi by not paying attention to the instruction for upgrading to 1.19.1. I tried to do the reinstall with BOSSA program without any luck. Last nite the computer and printer at least knew each one existed and the morning there is no communications between the 2. I've had no luck with fallback procedure #3 any ideas or suggestions would be great
-
-
Ok got it to respond With the BOSSA and I'm using the 1.8 version is that the right one
-
Using BOSSA 1.8 but still not able to get firmware to load
-
Check that you have downloaded the file correctly, it should be a little over 300kb in size. In Bossa check boxes Erase all, Lock and Boot from Flash before pressing Write. After writing the firmware, press Reset or power the board off then on, and the Duet port should appear in p!ace of the Bossa port.
