[3.4b6] M201.1 default values sometimes higher than M201

oliof

Hi,
on my i3 style IDEX:


M201
Accelerations (mm/sec^2): X: 2000.0, Y: 2000.0, Z: 100.0, U: 2000.0, E: 2000.0:2000.0
M201.1
Reduced accelerations (mm/sec^2): X: 1000.0, Y: 1000.0, Z: 250.0, U: 1000.0, E: 250.0:250.0

I haven't set M201.1 in config.g, so I assume these are default values. I'd posit that reduced accelerations should never be higher than default accelerations.