please help me blv setting

[PaulHew]

I have looked, but what printer is it please?
Picture also?

[A Former User]

@paulhew hello blv mgn cube

[PaulHew]

3 things that could be an issue.
Has the gantry been de-racked?
Do the Z rods move smoothly, no untoward noise? Bed securely fixed.
How old is the PLA? and is it a good quality?

I keep my PLA and PETG in a sealed box when not in use. Has a rechargeable silica box in it.
And before use, I throw it in the de-humidifier for an hour.

[A Former User]

@paulhew hello yes my z it's sfu 1204
yes it moves noiselessly well oiled it pla ila 2 months but I use it on my cr10s and the parts are perfect the bed well fixed nothing abnormal

[A Former User]

@sgk Has the gantry been de-racked? what does it want? racked

[A Former User]

@sgk I changed my hotend dragon hf plus extrudezr orbitor and my rods slide perfectly

[A Former User]

@paulhew
I made another cube to see I did the pid hotend again

[A Former User]

@sgk

[martin7404]

@sgk From All the writings and photos If I was in your shoes, I would do the following

1. Both bed and hotend temp check with external measurement and then calibration
2. SFU are stiff, so some kind of anti-wobble device for the nut, it can be nylock nuts or some printed set
3. Flow calibration and E steps
4. finally X/Y stage, belts tensioning check

[A Former User]

@martin7404 the sfu i have this

https://www.thingiverse.com/thing:4768321?fbclid=IwAR0n1YD84eqXpPBC8l3FB_EwVlQDytEEF3Mr6htjmp5YXfQqavotYp6uZ6I

[A Former User]

@martin7404 the hotend before I had e3dv6 and a different probe the z of t8 metal and extruder bmg changed to extruder orbitor and I had the same problem and when I touch the adjustment of the belt I have not much difference

[A Former User]

@martin7404 I wonder if the problem is not related to that because I print a 20x20x20 cube all the dimensions full and on the graphics it is not going

[A Former User]

@martin7404
here it is a graphic of someone who printed the same cube as me, we see that the lines are always the same

[A Former User]

@sgk
do you know why the time of each layer is not the same while the cube is the same everywhere

[A Former User]

@sgk this is my cube

[martin7404]

@sgk If you are sure Your bed is level and there is no wobble in the Z axis
then it is extrusion calibration and temperatures

[A Former User]

@martin7404
I do before each print g29

[martin7404]

@sgk ok can you share your bed graph

[martin7404]

@sgk p.s speed, accel , jerk ?

[A Former User]

@martin7404
I can't find where the graphics are