DWC Duet Web Control 3.4.0-rc2 no extrude or retract
-
@stephen6309 when i checked in the console which tool i have it has defaulted to T0 , but i have added it now to my config.g now.
Thanks for the reply -
Ok even though the firmware new that the tool T0 was selected adding T0 to the config seems to have fixed this issue.
-
This post is deleted! -
@arnold_r_clark
Ill get some Rat poison
-
same here with 3.4
Found out that you have to select tool active , then it works
