Toolchanger reboots during print
Andy Cohen last edited by
I’m still using v2.X of RRF. I’ve been experimenting with moving from Simplify3d (which has not been updated in years) to Prusaslicer. Trying the paint feature in the latest beta version. Each time I try to print the Duet board reboots during the print. I’ve swapped out the PS and put in a new power switch thinking I had a HW problem, but nowIm wondering if maybe the older version of RRF does not like the gcode coming from the latest Prusaslicer. Is this a good inference?
After it reboots please send M122 and report the results here.
It may also help to share your config.g and a sample sliced gcode file.