dani last edited by dani
Motor skips after heaters are switched on or off. This is my current tool definition gcode:
M563 P0 S"Extruder" D0 H1:2 F0 ; define tool 0
G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets
G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C
Is it possible there are other ending scripts related to extruding when the tool is selected/changed?
Can you be more descriptive in what you are seeing?
Which motor skips? When does it skip? Which heaters? During a print?
Please share your full config.g and the results of M122 and M98 P"config.g" please.
If you have multiple tools also please share your tool change files.