3.4.0 & Web Control Connection
-
@that-guy-e Can you say if the problem is reproducible from a different device and/or browser? The error counters from your first diagnostics looks odd but at first glance it's hard to tell why (
Error counts: 6 0 0 195 0). -
@chrishamm I can confirm that connection issue with a couple PC's and mobile device all using chrome on the network.
-
Initial testing of 3.4.1rc1 looks promising. Able to connect after being idle for an hour. I'll continue to monitor it and see how it goes. I didn't see anything in the release notes regarding the web server. Were there tweaks there.
-
After some additional time idle I'm back to not being able to load DWC from 2 PC's. Whats interesting is I then tried to open DWC from a mobile device on the network and it worked. After opening it from mobile both PC's were able to load the page. Both PC's were on ethernet while the mobile device was on wifi.
-
Do you often have multiple connections open from different devices?
-
Rarely if ever do I have multiple connections. I was just trying from a few different devices to see if the results were consistent.
-
What kind of switch/router do you have? What does the network topology look like between Duet and your PCs compared to your phone? Perhaps it's overly aggressive power control on the Duet port or something.
-
Its all business class hardware on the network side. I'll have to check with my IT group and see if they are seeing anything odd on there end.
I can also try rolling back to a pre 3.4 version. Perhaps the issue is on my end and I didn't notice till I updated to 3.4.0
-
I don't know if it would be possible for you, but could you try a direct network connection between the Duet and your PC just to eliminate the network hardware entirely?
https://docs.duet3d.com/en/User_manual/Machine_configuration/Networking#wired-direct-connection
-
sorry for the late reply, I just saw this. I'll do a direct connection and see what happens.
