CAN Board addresses small inconsistencies

[oliof]

Hi,
CAN Connection basics has a nice table how to set the CAN addresses:

Use addresses 1 to 15 for EXP3HC expansion boards
Use addresses 20 to 39 for tool boards
Use addresses 40 to 59 for external driver boards

Duet 3 Expansion 1HLC states

We suggest you use addresses starting at 50 for 1HCLs.

I would suggest to add the latter info to the former so people that find the general CAN connection page first and then move on to the 1HCL specific one don't face redoing their address range just to be consistent with documentation.

[droftarts]

@oliof thanks, will do!

Ian

[droftarts]

@oliof I've edited this, but actually changed the 1HCL page to match the CAN page.

Ian