I'm using the IR Probe. If I get G32 out of the box then I get the following image.
How I adjust the bed, the red dot I will not get away.
Meaning that the bed is not flat.
DADIY last edited by
Your link doesn't work.
Do these links work?
What type of printer is it?
Looks like either bed is domed, or your print head is sagging but only when it is near the middle of its travel in both the X and Y directions.
You can check whether the bed is flat by holding a known straight edge against it, for example a steel rule. The shape may change depending on whether the bed is hot or cold.
It is a private construction printer with a 300x 300 print bed.
Thanks for the tip. I will look forward to it soon.