Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    How would I connect a BL Touch to Toolboard 1LC v1.2?

    Scheduled Pinned Locked Moved Solved
    Duet Hardware and wiring
    2
    4
    285
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • TRATOONundefined
      TRATOON
      last edited by

      How would I connect a BL Touch to Toolboard 1LC v1.2? The documentation shows a 4 pin screw terminal, but there isn't one on mine (maybe that's an older version). And how would I configure the BL Touch in the RepRap Configuration Tool? (Just bought a Duet 3 so I'm making new firmware)

      dc42undefined 1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators @TRATOON
        last edited by dc42

        @tratoon it's the same as in the photo at https://docs.duet3d.com/Duet3D_hardware/Duet_3_family/Duet_3_Toolboard_1LC#connecting-peripherals except that the IO0 connector is now a 4-pin JST PH connector instead of a terminal block.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • TRATOONundefined
          TRATOON
          last edited by

          @dc42 I notice that the Brown and Black wires go together in the screw terminal, how would I do this in the connector?

          dc42undefined 1 Reply Last reply Reply Quote 0
          • dc42undefined
            dc42 administrators @TRATOON
            last edited by

            @tratoon the wires are thin so you can crimp two of them into one pin.

            Duet WiFi hardware designer and firmware engineer
            Please do not ask me for Duet support via PM or email, use the forum
            http://www.escher3d.com, https://miscsolutions.wordpress.com

            1 Reply Last reply Reply Quote 0
            • TRATOONundefined TRATOON marked this topic as a question
            • TRATOONundefined TRATOON has marked this topic as solved
            • First post
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA