Possible glitch in print duration value
-
Hi,
I am in the middle of a print and glanced at the browser and saw that the print duration was 3h 59m ?s (I didn't notice the seconds value). That surprised me as I knew the print had only been running for around 3 hours. A couple of seconds later the value was updated to 3h 0m ?s (I didn't notice the seconds value). Seems the hours gets incremented before the seconds roll over. Perhaps this has been fixed recently as this machine is till using old firmwares.
Firmware Name: RepRapFirmware for Duet WiFi
Firmware Electronics: Duet WiFi 1.0
Firmware Version: 1.18.1 (2017-04-09)
WiFi Server Version: 1.03 (ch fork)
Web Interface Version: 1.15a
-
The code that sends the print duration was refactored in 1.20beta1. However, I think this was probably caused by DWC anyway, because RRF sends the duration in seconds and DWC converts it. Or maybe DWC isn't using that value, but is working out the print duration for itself.
