Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    configure the x and y position of my print head ?

    Scheduled Pinned Locked Moved
    Firmware installation
    2
    2
    113
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • axiomundefined
      axiom
      last edited by

      how do I have to configure the x and y position of my print head
      do I have to measure the distance to the endstops and enter it? if yes, where
      ?
      and how do i set the x-y position of my z-sensor afterwards
      Is that also the distance to the endstops or to the printhead?

      1 Reply Last reply Reply Quote 0
      • droftartsundefined
        droftarts administrators
        last edited by

        @axiom said in configure the x and y position of my print head ?:

        how do I have to configure the x and y position of my print head
        do I have to measure the distance to the endstops and enter it? if yes, where
        ?

        See https://docs.duet3d.com/User_manual/Tuning/Bed_origin

        and how do i set the x-y position of my z-sensor afterwards
        Is that also the distance to the endstops or to the printhead?

        See https://docs.duet3d.com/User_manual/Connecting_hardware/Z_probe_testing#measuring-probe-x-y-offset

        Ian

        Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA