Limit switch test..



  • First post on the forum… I'm just getting my CoreXY going and wanted to test the limit switches but don't see any feedback on the control panel when tripping a switch.

    The boards 3.3v indicates with a green light so I assume polarity/connectivity is correct.

    How do I test the limit switches?

    Thanks.

    VB,


  • administrators

    Two ways:

    1. In Duet Web Control go to Settings -> Machine Properties. That page shows the status of the switches, delayed by a fraction of a second.

    2. Send M119 from any input source and it will return the current status.



  • Perfect thanks.

    Appreciate the quick response.

    VB,


Log in to reply