Limit switch test..
-
First post on the forum… I'm just getting my CoreXY going and wanted to test the limit switches but don't see any feedback on the control panel when tripping a switch.
The boards 3.3v indicates with a green light so I assume polarity/connectivity is correct.
How do I test the limit switches?
Thanks.
VB,
-
Two ways:
1. In Duet Web Control go to Settings -> Machine Properties. That page shows the status of the switches, delayed by a fraction of a second.
2. Send M119 from any input source and it will return the current status.
-
Perfect thanks.
Appreciate the quick response.
VB,
