Volumetric rate 3.5.0-b2

[moth4017]

i always print by Volumetric speed so the figures are constant
Nozzel 0.6mm

Volumetric reported rate in DWC not he same as in prusa slicer.

bottom layers
Prusa slicer 10.00^3mm/s 64mm.s
DWC reporting 7.2^3mm/sec 42.8mm/s

rest of the print
Prusa slicer 6^3mm/s 39mm/s
DWC reporting 4.4^3mm/sec 26.1mm/s

[dc42]

@moth4017 do the requested speed and top speed that are reported at the same time as the extrusion speed match the values configured in PrusaSlicer?

[moth4017]

@dc42

The speeds reported in DWC are not matching the Prusa values

[Proschi3D]

This post is deleted!