G29 "Detailed Probe" not probing at G31 XY compensated offset points

  • What I'm seeing here is that if the first probe point is X50 Y50, the G29 routine will put the nozzle at X50 Y50, not the probe (based on the G31 XY offsets). Meaning that the probe is actually somewhere else instead of the location I want the probe to touch. Is there something I'm missing here? I've even negated my G31 XY offsets to see if I got the offset backwards, it doesn't seem to change the location probed.

  • OK followup, it's fixed now. I had the XY offsets negated from what they should have been. I'm not sure what I was thinking. I wasn't paying attention to the position numbers in the web console either.

Log in to reply