The Configuration Tool cannot generate all printer geometries

[genialePrutser]

I'm using the RepRapFirmware Configuration Tool.
After clicking on Custom configuration and next, I can choose these 4 printer geometries:
Cartesian
CoreXY
CoreXZ
Delta

In the documentation I see examples for the following printers:
CoreXY printer
Linear Delta printer
IDEX printer
DLP printer controlled by nanoDLP
Hangprinter
Polar printer
Rotary Delta printer
Serial SCARA printer
Five bar parallel SCARA printer
Robot printer

What can I do to extend the RepRapFirmware Configuration Tool to be able to generate more printer geometries?

[jay_s_uk]

@genialePrutser looks like they are all covered in the new version going through beta https://configtool.reprapfirmware.org/next

[genialePrutser]

@jay_s_uk
Thank you. This config tool is quite comprehensive. is it already stable enough to be mentioned in the documentation?

[jay_s_uk]

@genialePrutser its only been out 3 or 4 weeks. I expect it will go stable when 3.5 goes stable, then all the docs will be updated accordingly

[genialePrutser]

@jay_s_uk
I'm new here. How can I mark this topic as solved?

[jay_s_uk]

@genialePrutser i've done it for you