magnetic filament sensor error

P_a3

Hi, I am having difficulties with the magnetic filament sensor, I keep having this error:

I'm trying to print some pretty big parts on my 1m3 printer and I have this error every 20 layers or so still have 700 layers to go

here is my config file
config.g

what should i do?

Phaedrux

What firmware versions?

M591 D0 P3 C"121.io1.in" S1 E5 L26.62 R0:500;

P_a3

i did send : M591 D0 P3 C"121.io1.in" S1 E5 L38.45 R0:900
after looking at the calibration

Phaedrux

Your firmware is a bit old and a release candidate. Please try updating your firmware by uploading this zip file.

P_a3

@Phaedrux thank you,i just did the update, i will try to see if it help today on my next print