ConfigTool v3.5.0 endstop bug

[vaike_peeter]

new ConfigTool does not output correct configuration for 1LC connected endstop.
setup in ConfigTool

and generated config

M574 X2 P"nil" S1    ; configure X axis endstop
M574 Y2 P"io6.in" S1 ; configure Y axis endstop
M574 Z0              ; configure Z axis endstop

[jay_s_uk]

@chrishamm

[chrishamm]

@vaike_peeter @jay_s_uk Thanks for reporting this, it is now fixed in version 3.5.0-rc.2+4.