Firmware configurator and sensorless homing/zprobe



  • I have bought the wifiboard, i love it. I have first tried and managed to update to 1.20. Second step was to generate configuration with configurator.

    In new year i have to install duetwifi in my printer and recalibrate the slicer :).

    By now i didn't find option in online firmware configurator for sensorless homing/zprobe… Maybe because its new feature and configurator have to be updated first..

    So on, my first Post. Thanks to the developers, i like this Board a lot.

    Happy new Year.


  • administrators

    You are right, sensorless homing isn't an option in the configurator yet. Also, you will need to tune the stall detection to suit your own stepper motors and mechanics. See https://duet3d.com/wiki/Stall_detection_and_sensorless_homing.


Log in to reply