Not all M291 messages displayed on PanelDue 3.5.1

wschadow

When I recall correctly the initial bug was related to DWC, that is why am reporting this here again. On some occastions when pressing a button on the PanelDue the message related to this is displayed only, whereas the PanelDue shows only "busy"

This is pretty annoying when you sit in front of the printer and don't what the printer is waiting for. Especially when the computer is in the next room...

This is the ressurection of an older bug that was fixed.

T3P3Tony

@wschadow does this happen both ways, or just PanelDue initiated M291?

Also standalone or SBC mode?

chrishamm

@wschadow Also, if you restart/reset the PanelDue while the message box is visible on DWC but not on PD, does it show up then?

wschadow

@T3P3Tony So far I only noticed this behaviour when starting a macro from the PanelDue that M291 is not always displayed on PanelDue but only on DWC. I never experienced that an M291 is displayed not on DWC but only on PanelDue when M291 was issued through DWC

wschadow

@chrishamm I really tried hard to reproduce the error but was not successful . I keep an eye on that.

Ant1

@chrishamm I experience a similar issue, but when M291 is called from plugins... Here is the issue that I have opened to describe my problem: https://forum.duet3d.com/topic/36365/m291-issued-from-a-plugin-doesn-t-show-anything-on-the-paneldue