Effector with Duet-compatible Probe?



  • Good Evening, dear Reader!

    I'm getting closer to order a Duet WiFi (finally, after my old Phone has gone kaput, I had to put my 3D-Printer Project aside) and now I'm thinking about parts I can order too.

    For now, I see a heated bed Upgrade (With the Duet, that will already cost me 370€ T-T) and some kind of Z-Probe. Buuuuuut I don't know what to choose. Especially since I totally SUCK at 3D-Design.

    So my question now: Has anyone made stl.-Files for a Kossel Mini Effector with an E3D Chimera/Cyclops and some Probe? I have a spare Microswitch laying around and thought about using that.

    Kinds Regards

    TitanOne a.k.a. Dennis


  • administrators

    I found this https://www.shapeways.com/product/E628BXAJW/bi-v2-5-effector-for-chimera-with-ir but it's not cheap and I don't know whether the rod spacing is suitable for a Mini Kossel. There is at least one thread on using a Chimera/Cyclops on a delta on the reprap forum, but that forum seems to be down at present.



  • @dc42:

    I found this https://www.shapeways.com/product/E628BXAJW/bi-v2-5-effector-for-chimera-with-ir but it's not cheap and I don't know whether the rod spacing is suitable for a Mini Kossel. There is at least one thread on using a Chimera/Cyclops on a delta on the reprap forum, but that forum seems to be down at present.

    Unfortunately, that looks like it won't fit, but still thanks!


Locked
 

Looks like your connection to Duet3D was lost, please wait while we try to reconnect.