4 Axis Printing
-
Evening All
I searched and couldn't find any other posts on this topic.
I stumbled across This Video
The guy seems to know what he is doing and has employed a duet board too
-
@Mr-Crispin you may find more posts about 5 axis printing than 4 axis.
-
@Mr-Crispin he has done the kinematics calculations in his gcode generation program. so in this case the Duet does not "know" its multi axis printing. @JoergS5 has done some work in implementing variations of robot kinematics that run on the Duet boards themselves.
