Duet 0.85 Reflashing after bricking
-
Hello All,
Long time follower here
Have old Kossel Mini 3 with Duet 0.85 firmware on board.
I wanted to update to
releases - 2.05.1 (not allowed to post links, but it is from Git Firmware Repository
today, but I guess I bricked my Duet 0.85.Before bricking it, I was running
Firmware Name: RepRapFirmware for Duet
Firmware Electronics: Duet 0.85
Firmware Version: (cant remember version but I remember the date) (2019-11-09b1)
Web Interface Version: 1.21 ( something around here)Could someone kindly point me to a procedure to update or reflash these old board?
Update I can connect to microcontroller onboard using Sam-ba 2.17.
I tried updating Duet2CombinedFirmware.bin as stated in Duet3d Documentation, but it didnt do the trick.On board I still have all three LEDs permanently active (Blue, Red Yellow)
I tried copying DWC to SD card /www folder but without success.
In /sys/config file I reviewed ethernet settings. They are set correct. My thinking is programming process is unsuccessful and thus I have no access to the board over ethernet...Again, any help is greatly appreciated.
Kind Regards,
OldschoolPirate -
@oldschoolPiratename Flashing the 0.85 is the same as current boards, ie use Bossa. I've never got Sam-ba to work. See https://docs.duet3d.com/User_manual/RepRapFirmware/Updating_firmware
Use the 'RepRapFirmware.bin' file from https://github.com/Duet3D/RepRapFirmware/releases/tag/2.05.1 which will update the board to 1.26.1. Duet 0.6/0.85 can't run RRF 2.x.
Ian
