[3.6.0-beta.4] DWC Connection
-
Hello,
I have a strange issue with DWC with this beta firmware in particular. The boars is a Duet2WiFi. The issue means if the printer is idle, no matter for how long, the DWC remains almost stable, but unusable (some reconnects during many hours)The strange thing occur after starting a job. Regardless of the gcode file, after a couple of seconds in the job, DWC is starting a loop of disconnects and reconnects until the board is reset via the emergency button on PanelDue
I have installed all the relevant binaries/DWC zip from the 3.6.0-beta.4 release on GitHub
-
undefined Leonard03 marked this topic as a question
-
@Leonard03 Is the PanelDue firmware up to date? It should be on 3.5.1: https://github.com/Duet3D/PanelDueFirmware/releases/latest
Ian
TronXY X5S with Duet 3 MB6HC and Roto toolboard : Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : Polargraph with Duet 2 WiFi
-
@droftarts Thank you for the fast replay!
Yes, my PanelDue is on firmware 3.5.1 and I'm using the max baudrate available. Seems to be more reliable -
@Leonard03 It's possibly your issue is similar to the one reported in this thread: https://forum.duet3d.com/topic/37545/mini-5-wifi-problem-revisited/. We have asked @rechrtb to look into it.
Ian
TronXY X5S with Duet 3 MB6HC and Roto toolboard : Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : Polargraph with Duet 2 WiFi
-
@droftarts You're right, it seems similar to mine. I'll wait then
Thank you
