Cooling fan for Titan Aero
Nylkos last edited by
I just added a cooling fan and got my first PLA jam in my heat break on my first print (temp tower)…
I am guessing that the fan was possibly too high on the nozzle or the block.
Does anyone have a good model to go with the basic bracket (https://e3d-online.com/titan-motor-bracket)
There are many options on Thingiverse for various mounting systems.
kingfisher last edited by
I've got these on my print list atm…
I used this one for a while: https://www.thingiverse.com/thing:2240359
Qdeathstar last edited by
I printed the one that Phaedrux linked, it works OK as long as you arent using dual extrusion.