Duet3D Logo

    Duet3D

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    Duet Ethernet firmware update instructions

    Firmware installation
    2
    2
    884
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • 3DPMicro
      3DPMicro last edited by

      Just getting started here so I have little understanding. I have the Ethernet version and need to update from 1.18.2 to 1.20 firmware. Beginning at the "getting started" section I am at the point I need to update but the instruction are for the Duet Wifi. Do I follow these same instructions https://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware#Section_Updating_WiFi_firmware_or_DuetWebControl_files
      for the Duet Ethernet?

      1 Reply Last reply Reply Quote 0
      • dc42
        dc42 administrators last edited by

        Good point, that page doesn't properly cover the Duet Ethernet. To update you need to:

        1. Upload the new DuetEthernetFirmware.bin file through the button on the Settings General page, and accept the invitation to install it;

        2. When that is complete, upload the new DuetWebControl.zip file through the same button.

        There are no special actions needed when crossing firmware version 1.19.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA