Sorry, confused by G30



  • Hi
    I have measured the offset of the iR probe to be 1.575mm
    M558 P1 H5 F120 T6000 ; Set Z probe type to unmodulated and the dive height + speeds
    G31 P500 X30 Y2 Z1.575
    I changed that in my config.
    When performing a G30 it sets Z=0 when the probe detects the bed…shouldn't it set z=probe_offset?



  • Ok that is weird….after I restarted I do get the Z-offset upon G30....that is what I expected


Locked
 

Looks like your connection to Duet3D was lost, please wait while we try to reconnect.