Fluctuating temperature
-
I am running wifi firmware 1.16, wifi web server 1.03 and web interface 1.13 and have noticed that my nozzle temperature is fluctuating between 195.6 and 198.2 with it set to 197.
I am printing a large print with a 0.4 nozzle, layer height of 0.3 and print speed of 3800 and wondered if my 12 volt heater was coping with this throughput but having watch very closely I can not see any connection that is accounting for this wild difference.Any ideas of how to solve this?
Would the following be useful to other users? If so I'll raise a feature request.
It would be handy if instead of the Extruder Drives information duplicating the filamant Usage, it displayed the current filament speed. -
If the temperature oscillates even when the print head isn't moving, increase the dead time in the M307 command.
