Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Teknic ClearPath SDSK motors and Duet w/expansion board

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    2
    917
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • JaredCundefined
      JaredC
      last edited by

      I am designing a machine and before I purchase motors and control boards, I'd like to know that the Duet can control the Teknic motors. I have spent hours reading this and other forums. I have found lots of posts by people that have the motors running with some other board, and they are planning to upgrade to a Duet, but I have not found any examples or posts saying anyone has done it. If there is a build that someone can point me to that would be greatly appreciated.

      I've read through the External Stepper motor drives WIKI and know that it should work using the expansion board. If I want additional I/O that are available on the Duex2, I will have to take the 3.3V signals and boost them with external drive ICs such as 74HCT04. Has anyone done it?

      Thank you!

      1 Reply Last reply Reply Quote 0
      • number40fanundefined
        number40fan
        last edited by

        https://forum.duet3d.com/topic/4570/how-to-connect-integrated-servo-motors/19

        Some talk about them.

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA