Impossible to flash my Duet wifi
-
Hi, yes the size is 372, try with this link please: https://youtu.be/PNkdRx7adss
-
At 1:41 in the video SAM-BA reported "Sent file and memory do not match". So programming failed.
Please try using Bossa instead. Instructions are at the end of https://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware#Section_Fallback_procedure_Num_3.
-
Nothing, i don't know if i'm doing something wrong.
https://youtu.be/A-Cq0FEep74
This is my Duet i'm using the Duetwififirmware, this is right? -
Yes, DuetWiFiFirmware.bin or Duet2CombinedFirmware.bin from the 1.21 release area is correct for that Duet.
What happens if you write the firmware using Bossa, but after that click Verify?
-
do the windows drivers need to be loaded before the port will be recognised after flashing?
could that be why it isn't being recognised afterwards?
-
I would expect Device Manager to report "Unknown device" if the Duet was detected but no driver for it was found. You do have a couple of unknown devices showing, but they are flagged "Dispositivo base del sistema" which according to Google Translate means "Base device of the system".
-
@dougal1957 said in Impossible to flash my Duet wifi:
do the windows drivers need to be loaded before the port will be recognised after flashing?
could that be why it isn't being recognised afterwards?
If i try to install de driver in the ports you can see nothing happen, i don't know what's that but is not the due because if i plug or unplug the Duet that ports still there and if i install the Duet driver an error message appear. -
Thank you, Bossa is getting verify errors, just like SAM-BA did. Please ask your suppler to replace the Duet under warranty.
-
I bought it on your web, how can I send the Duet?
-
