Lower carriages after homing to maximum z for effector movement.



  • The latest marlin rcbugfix version when setup on a delta does a nifty thing. After homing it lowers the carriages to the z height at which they can move sufficiently to allow full effector travel.

    This is useful as it makes it quite clear what your real maximum z height is. I presume it calculates the distance depending on calibration parameters.

    Wondered if this is something worth implementing? I am aware I could do this easily with my homing file.


Locked
 

Looks like your connection to Duet3D was lost, please wait while we try to reconnect.