Controller Ills

3mm

Still having problems with my controller.
Fan1 no longer reports, irregardless of M104 settings, randomly runs or not.

EtherNet drops connection intermittently, only two devices on the network, LapTop and DUET-E controller.

Still can't cause the Smart-Effector (E3D-V6) hot-end to attain minumum PLA printing temperatures.

I think its broken, aside from the heat-bed power-FET short.

3mm

dc42

@3mm said in Controller Ills:

Still can't cause the Smart-Effector (E3D-V6) hot-end to attain minumum PLA printing temperatures.

Multiple issues like that can be caused by a power issue, either a bad PSU or a bad connections between the PSU and the VIN terminals of the Duet. In the M122 report, what values are given for the min and max VIN voltage?