Idea for Z-probe

  • Do you have an idea which Z-probe type works best for my print head?

    Here is a link to a 3d model of my printhead.

    Prints on glass, Buildtak or Alu Pei plate

    I've bought an IR probe (mini-difference IR sensor), but the assembly for my little printhead is not optimal and measures again and again something wrong.
    0_1529187849227_IR-Sensor montiert.jpg
    Probably because my printing surfaces are not quite intact, already have a few scratches quirks.
    circled wrong measurements:
    0_1529188014931_falsche mussungen.png

    I am grateful for every idea

Log in to reply