Homing z axis with z probe
Puppet172 last edited by Puppet172
When I am homing my z axis the axis's i assume are moving to the first probe point but what they do is run into the end-stops and just grind against it. How would i fix this? i can post any files you need just ask. Here is my config and z home file though
Also what P command should i use in M558 to define what probe i have. My probe is this
I answered the first question in your other post a few minutes ago. Regarding the second question, see https://duet3d.dozuki.com/Wiki/Connecting_a_Z_probe#Section_NPN_output_normally_open_inductive_or_capacitive_sensor.