Enclosure Heater on Duex2
rikesh942010 last edited by
I want to mount a Enclosure heater for my 3D printer and was wondering if the Duex2 Expansion board is able to power this through the extruder heaters.
I have read somewhere that the Duet Wifi is able to go upto about 9Amps for the extruder heaters but couldn't find much information for the Duex2 boards.
So the heater is 24V at 150W - which would be about 6.25Amps, can anyone confirm if this is okay to power through the extruder heaters on the Duex2 expansions board.