Max amp draw from fan ports

[maxresdefault]

I bought a Duet 2 Maestro and would like to potentially attach a 0.9amp fan to the controlled fan port. I assume this limit is probably the same for the Duet Wifi. It's for a project for hepa filtration in an enclosure. Is this too much?

[dc42]

Yes it's the same limit. 0.9A is OK provided that the starting current doesn't exceed 3A.

The latest beta firmware allows you to remap a fan to a spare heater output, so if you are not using the E1 heater output you could use that instead.

[maxresdefault]

@dc42 Thank You!